 |
 |
 |
|
 Mechanical Industrial and Technical Calculations for SolidWorks
Mechanical Industrial and Technical Calculations for Solid Edge
Mechanical Industrial and Technical Calculations for many CAD systems
|
|
 |
|
 |
 |
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….).
|
|
|
|
|
|
 |
This multi-language calculation package includes solutions for gearing, belt, chain, bearing, springs, beam, shaft, and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….
|
|
|
|
|
|
|
|
|
|
 |
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D (and 3D) CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….).
|
|
|
|
|
|
|
 |
Pocket 12C is an HP-12C emulator for Pocket PC. More than 130 built-in functions in version 1.5. Supports both RPN and ALG data entry. Fully programmable in HP-12C syntax. Time Value of Money. Cash flows analysis. Amortization. Bonds calculations. ..
|
|
|
|
|
|
 |
CalcuNote is an arithmetic calculator, adding machine, and time calculator that documents calculations on multiple tapes which you can edit. It can make and record complex sets of interrelated calculations, print and save tapes.
|
|
|
|
|
|
|
 |
This module lets you calculate the following orifice-types: Gas Orifice, Liquid Orifice, Restriction Orifice, GasRestriction Orifice - Liquid. For gas-calculations you have to enter specific gas gravity, temperature and pressure. You can also give ..
|
|
|
|
|
|
 |
TechSheet a technical spreadsheet that allows for calculations that incorporate units of measure with associated values in each cell. Numerical manipulations result in consistent units of measure and automated unit conversions.
|
|
|
|
|
|
|
 |
Calc Pilot allows you to perform calculations inside a document. For example, you have an expression "2+3=". If you press a hotkey, then you'll see the result: 2+3=5.00.
|
|
|
|
|
|
|
 |
PHex is an easy to use tool which domonstrates the thermal calculations of Gasketed Plate Heat Exchangers
|
|
|
|
|
|
|
|
Next Generation Calculations.
The CalcBoard supports: Calculations using units; Interval arithmetics; A wide range of standard functions; Easy (calculator-like) interface; A set of persistent variables to assign expressions to, Syntax highlight.
|
|
|
|
|
|
|
